Z-Wave Expert Consultant
Bringing the Internet of Things to Life!
Express Controls Z-Wave Products

ZWP500TM Z-Wave Production Programmer and Test Platform
The ZWP500 is a robust and reliable programmer for the Sigma Designs 500 series of Z-Wave modules. A high-speed SPI bus interface programs the Z-Wave module in seconds. The ZWP500 is designed to operate on the factory production floor with a fanless design and push-button operation. The Raspberry Pi Linux computer is augmented with a PSoC5 microcontroller to provide the most accurate and fastest programming times possible.

A Z-Wave module with a programmable RF attenuator allows the ZWP500 to fully test the RF parameters of the target DUT. A 1ppm accurate crystal calibrates every device for optimal RF performance.

The Python API enables customizable production programming and testing. Program each NVR with a unique AES-128 Security S2 DSK pin code or other custom fields. Set the LOCK bits to prevent unauthorized access to the firmware. Have your team develop the test code or let the experts at Express Controls do it for you.

  • Programs Sigma Designs 500 series Z-Wave SoCs/Modules
  • FLASH & NVM Programmer
  • Production Test Platform
  • Firmware Validation Platform
  • SmartStart enabled with QRCode generation and printing
  • Open platform based on Raspberry Pi
  • Programmable in C, Python and many more languages
  • 1ppm crystal for Z-Wave RF calibration
  • Fanless Linux Computer in protective enclosure
  • Programming and Testing services available
  • Designed and assembled in the USA

Click HERE to buy the ZWP500
Click HERE for the ZWP500 Datasheet
Click HERE for the ZWP500 User Manual

***Version 2.0 with screw tabs and SmartStart Now Shipping  ***

 EZMultiPliTM Z-Wave Plug-in Multi-Sensor
Click HERE to BUY EZMultiPli


  • Motion Sensor
  • Temperature Sensor
  • Light Level Sensor
  • Color Indicator/Night Light
  • Mains Powered - No batteries!
  • SmartStart Enabled with AES-128 encryption
  • Z-Wave Range Extender
  • Z-Wave 5th generation technology
  • Over-the-Air Firmware updatable
  • Designed and assembled in the USA

​​So many possible uses!

  • Turn on lights when you enter a room, turn them off automatically when the room is unoccupied to save energy.
  • Receive a text or email when motion is detected in your home or office.
  • Receive an email when the temperature in you ski chalet drops to a dangerously low temperature saving thousands in water damage.
  • Know when the garage doors are open or if rain is predicted today or any other notification you can imagine and display it with the eight color LED.
  • All of these uses and many more are made possible when the EZMultiPli Multi-Sensor is added to your Z-Wave network.

Home Control Platform Support

         HomeSeer HS3
        Other Hubs coming soon!

Simply plug EZMultiPli into the wall, press the button to join the Z-Wave network and you're ready to control your life. EZMultiPli is ideal in a spare outlet in a kitchen, bath or hallway. The wide angle lens does not need to be aimed at the source of motion so no screws, wires or batteries are needed.

Fifth generation Z-Wave technology means that each EZMultiPli added to your Z-Wave network improves the speed, reliability and range of every node on the network. Over-The-Air firmware updates means EZMultiPli is always using the latest firmware which can be easily updated after its installed in your home.

Click HERE to see the EZMultiPli User's Manual.

 EZZeeTM Z-Wave Interface for the Raspberry Pi (RPi)​​

  • Z-Wave interface for the Raspberry Pi
  • Z--Wave Plus Certified
  • Fifth Generation Z-Wave technology
  • 300+ foot RF range
  • Integrated Antenna
  • Color LED
  • ​When paired with the capable and low-cost Raspberry Pi 3, you can make a small and affordable smart home controller years ahead of other "smart hubs" on the market.
  • EZZee is the interface  used in  HomeSeer HomeTroller Zee S2 Home Controller

If you are interested in being an OEM (quantites of 100 or more) for EZZeeTM Z-Wave Interface for the Raspberry Pi (RPi), please  contact us.   

Click HERE to see the EZZee Datasheet.

 ASCI Protocol

  • Simplified Z-Wave Serial Interface
  • AES-128 Security S0 automatically supported
    • Key exchange on inclusion
    • Encryption/Decryption
    • Security Negotiation
  • Firmware update via OTW
  • Network Management module reports problem nodes
  • Z-Wave Plus Certified
  • Sample Python application 

If you are interested in learning more about ASCI Protocol, please  contact us.  ​

Click HERE to see the ASCI Protocol Datasheet.